UP-PUTTY
페이지 정보
본문
UP-PUTTY
Description
- UP-PUTTY Epoxy type This product is a high-functionality putty with excellent workability and hardening properties . Crack repair, grouting Sealing , connection It exhibits excellent performance for sealing and other applications .
- Appearance after mixing : Colored viscous liquid (paste state)
- Solid content Content: 97% or more
- Excellent durability with excellent adhesion
- 1:1 mixing ratio (Wt ) Excellent workability .
- Sealing and bonding of concrete cracks
Physical Properties
|
characteristic |
Gloss |
Semi-gloss |
color |
gray) |
Paint composition |
2- component type |
Mixing ratio ( Base : hardener) |
1 : 1 ( wt ) |
Packaging Unit ( Base : hardener ) |
10 Kg packaging = 5Kg : 5Kg / 20Kg packaging = 10Kg : 10Kg |
Volume solids ( %) |
97 or higher |
Mixed specific gravity |
1.66 ± 0.1 |
Spreading rate (Theoretical) |
0.85 kg /㎡ (500 ㎛ ) |
Recommended dry film thickness ( ㎛ ) |
500 ㎛ ( depending on the surface to be repaired ) |
Pot life (20 ℃ ) |
30 min |
Concrete must be sufficiently cured. (Temperature: 25℃ , relative humidity: 80% or less, cured for at least 28 days.)
of the base surface Oil , moisture , sand , dust, laitance etc. etc Completely remove foreign substances Remove and maintain flatness .
In the case of materials where penetration of the undercoat is difficult, a film of the undercoat may be formed during the undercoat painting, which may cause poor adhesion to the intermediate coat, so sufficient pretreatment work must be performed before painting the undercoat .
Ambient temperature: 5 to 35℃, surface humidity: 80% or less, concrete moisture content : 6% or less, surface temperature: 40℃ or less, surface pH: 9 or less
Surface temperature : at least 3℃ higher than the dew point temperature
Please note that discoloration and chalking may occur when exposed outdoors due to the nature of epoxy paint
Concrete must be sufficiently cured. (Temperature: 25℃ , relative humidity: 80% or less, cured for at least 28 days.)
of the base surface Oil , moisture , sand , dust, laitance etc. etc Completely remove foreign substances Remove and maintain flatness .
(If foreign substances are not completely removed, poor adhesion may occur .)
Under coat : epoxy primer
Putty : UP-PUTTY ( if necessary
putty knife, paint spatula
Base (Part A): Hardener (Part B) = 1:1 ( by weight )
Undiluted
Item ＼ Temperature |
5 ℃ |
20 ℃ |
30 ℃ |
Set to touch (Hr) |
6 |
4 |
3 |
Dry-throgh (Hr) |
24 |
12 |
6 |
Minimum repainting interval (Hr) |
36 |
12 |
9 |
Maximum repainting interval (Day) |
6 |
4 |
3 |
8. Precautions for use
On rainy days , days with high humidity (over 80 degrees Celsius), days with low temperatures ( below 5 degrees Celsius), and days with high temperatures ( surface temperatures above 40 degrees Celsius), normal
Avoid painting as it will not exhibit its properties.
During painting, the ambient temperature must be above 5℃, and the surface temperature of the substrate must be lower than the dew point to avoid condensation of moisture.
It must be above 3℃.
Measure the base and hardener accurately in the specified ratio and mix with an electric mixer. Enough to ensure that no unmixed matter remains.
Mix.
Coating in compliance with the recommended thickness will result in excellent coating gloss and physical properties.
• The amount of paint required may vary depending on the condition of the painted surface, roughness, climate conditions, and painting method, so please check carefully before use.
• When applying a repair coating on a previous coating or old coating , perform a test coating in advance and if there are no abnormalities (such as adhesion), apply the repair coating.
• Apply the base coat completely to areas that have not been treated with the base coat , as there is a risk of bubbles forming during the second coat .
• When diluting the paint thinner excessively to improve mixing and workability at low temperatures, drying may be poor, film hardness may be reduced, and cracks may occur. Phenomenon occurs
Be careful, it can happen
• Gaps, grooves, cracks , etc. are treated with epoxy after V-CUTTING. After filling with putty , sand and treat the surface before painting.
• Winter season and cement Protrusion or Unseen scene Chalking , absorption vehicle severe Cotton , cement Yongchul severe Part , condition
Bad construction site Area ( especially Salt content many Beach , UV rays strong place , low-grade paint coating The part ) is poor attachment Prevention , discoloration and
possession Adjustment Suitable for Haji treatment agent suggestion By dilution ratio Dilute it preceding By painting Please pay attention I hope . ( on concrete
Applying of the product case )
• Avoid painting in high humidity conditions, such as when it is raining or snowing. This may cause the paint to whiten and lose its gloss.
• You must wear protective gear while working to avoid inhalation and skin contact , and if contact occurs , wash with water several times.
You should seek medical attention immediately.
• Do not reuse any remaining mixed residue, and store any unmixed residue in a cool, dark place , away from fire.
• Be sure to wear protective equipment when working.
• Avoid contact with eyes, skin and respiratory tract with the generated vapors .
• Use ventilation.
• Do not work in confined spaces.
• If it comes into contact with clothing, be sure to wash it with soap and detergent and water.
• After completing the painting work , immediately wash the equipment using urethane thinner.
• Cloths or other items contaminated with the product may spontaneously combust if stored together with flammable materials, so be sure to dispose of them in a non-flammable container.
• After painting, wash your body thoroughly with soap and water .
• Dispose of waste paint in accordance with the Ministry of Environment ordinance and local government laws and regulations.
Storage
• Moisture None The temperature 5℃ ~ In a room maintained at 25℃ completely Sealed Keep it.
• Outdoor storage is prohibited.
(Storage performance is affected by ultraviolet rays and external temperature) away Sedimentation Back Will occur number and it rains Due to influence can Internal and external Rusting and Moisture inflow Will occur number , and inside the can Moisture Will be introduced In case of poor curing, etc. Will occur number there is.)
• Direct sunlight directly subject Outside Storage / Use whirlwind In response Followed paint rigidity The phenomenon As it occurs certainly Indoor storage
Do it I hope so .
• product Courage is certainly Sealed The injection port The top Towards custody Do it I hope so .
Storage period
• 12 months from the date of manufacture ( 5℃ ~ (When stored indoors at 25℃)
• Depending on the storage environment, the storage condition (sedimentation and separation, change in paint viscosity) may change and the storage period may be shortened .
Warnings and Precautions
Please refer to the MSDS for further details
- 이전글UP-P100 26.01.07
- 다음글SMK-Sealer 25.12.24
