Densifier / Ultratop-Li
페이지 정보
본문
Product
Densifier / Ultratop-Li
Description
Overview
Ultratop-Li is a water-based lithium silicate solution used to densify and dustproof concrete surface. It penetrates and chemically reacts within the concrete surface, producing extremely hard and dense calcium silicate hydrate in the pores. The result is that concrete is more durable, easier to clean, and more resistant to damage from water and mild chemicals.
Benefits
- Eco-friendly products
- Excellent and deep penetrating to concrete
- Treated concrete is more dense and durable
- Permanent treatment that never peels off
- No efflorescence appears
- Easy application
- Apply to new or old concrete
Application
- Chemical factory, parking lot, warehouse, shopping mall, convention hall
- Exposed concrete or mortar finish
- Open-air storage yard, rooftop
Technical Data
- Color, appearance : clear, liquid
- Odor : None
- Freezing point : 0℃
- pH : 10~11
- Density (25℃) : 1.15
- Viscosity (25℃) : less than 18cps
- Solid content(250℃, 1hr) : 15~17wt%
Application Procedure
- Preparation of substrate
- New concrete must be dried for at least 20 days
- The surface must be clean without dust or any contaminants.
- Make sure completely dry surface before application
- Remove weaken part , repair and fill it or cracks
- Condition
- Apply under surface temperature of 5~35℃
- Avoid very hot day, freezing day, rainy day or windy day as this product tends to evaporate or freeze easily.
- Application
- Spray it with low-speed sprayer to saturate the surface.
- Sweep it out with dry cloth or sponge where this product is collected in one spot.
- White powder may appear if over applied
- In 12 hours/25℃, apply SM-HS sealer, which can be considered an option to improve surface protection
- In 3~4 hours/25℃, proceed with SMB: SM burnishing machine, which can be chosen by user for better effect.
- Dry Time
- Within 72 hours after treated, keep the surface off water.
- At least 7 Days need to dry it completely although surface dry completes within 1~2 hours.
- In case of painting epoxy or urethane on it, 15-day dry time and paint not including thinner are required.
Package
20L/pail, 200L/drum
Shelf Life
24 months if kept at 5℃~35℃, cool place and unopened
Health and Safety Precaution
- Wear protective clothing, gloves, eye protection and dust mask during work.
- In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
- If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
- Provide ample ventilation when working with the product in confined spaces.
- No naked flames, cigarettes or matches should be allowed near the products.
- Dispose of waste and residues in accordance with local authority requirements.
- In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.
- 이전글Densifier / Ultratop-So 25.12.24
- 다음글SM COAT FC 25.12.24
